SCRUBB Resin Driveway Cleaner is formulated to effectively lift grime, green deposits, ingrained soil, grease, bird droppings and leaf stains from resin driveways without damaging the surface. Suitable for both periodic and regular use to maintain resin driveways in optimum condition. Regular use will prevent the build-up of grime and deposits and improve traction.
| Size | Product Code | Case Qty | Pallet Qty | Barcode |
|---|---|---|---|---|
| 5L | S71SC C500 | 2 | 160 | 5037832344236 |
APPLICATION:
Prep the surface: Brush away any loose dirt or debris so the surface is clear.
METHOD:
Apply the cleaner: Apply the product neat (undiluted) using a sprayer or watering can until the surface is thoroughly wet. For heavy grime, gently scrub with a stiff-bristled brush.
CLEAN OFF:
Let it work: Allow it to sit for 15–30 minutes, then rinse off using a hose or pressure washer. Let the driveway fully dry before allowing pets or children onto it.
SCRUBB Resin Driveway Cleaner is specifically formulated for resin-bound and resin-bonded driveway surfaces. It effectively lifts grime, green deposits, grease, bird droppings, leaf stains and ingrained dirt while remaining safe for resin driveway materials when used as directed.
The cleaner is designed to tackle typical outdoor driveway contamination, including algae-related green deposits, grease, organic staining, soil build-up, bird droppings and leaf marks. Regular cleaning helps keep resin driveways looking fresh and well maintained.
For most applications, the product should be applied neat (undiluted) using a sprayer or watering can to thoroughly wet the surface. When using a pressure washer detergent tank, it can be diluted at approximately 50ml per litre of water.
Once applied, allow the cleaner to work for 15–30 minutes. This gives the formulation time to break down dirt and deposits before rinsing away with a hose or pressure washer.
Light agitation with a stiff-bristled brush is recommended for areas with heavier grime or stubborn deposits. For lighter cleaning, the product can work effectively with minimal brushing before rinsing.
A 5-litre container provides coverage of up to approximately 30m², depending on surface condition and application method. Highly soiled areas may require more product.
Avoid contact with ornamental plants, lawns and ponds. If accidental contact occurs, rinse the affected plants immediately with clean water. Care should also be taken to prevent run-off entering ponds or water features.
Yes. Resin surfaces can vary, so it is recommended to test the cleaner on a small, inconspicuous area first before treating the entire driveway.
Keep children and pets off treated surfaces until they are fully dry. This ensures safe use and allows the cleaner to work properly.
Got a question that’s not answered here? No problem, get in touch for expert help and advice.
