SCRUBB Porcelain Paving Cleaner is a specialist formulation for cleaning and maintaining exterior porcelain tiles and slabs. Suitable for frequent use, it contains no bleach or acids which can damage paving surfaces over time. Easily shifts grime, ingrained soil, grease, bird droppings and leaf stains. Maintains porcelain in optimum condition and will not affect its slip-resistant properties. SCRUBB Porcelain Paving Cleaner will not remove staining caused by algae or mould.
| Size | Product Code | Case Qty | Pallet Qty | Barcode |
|---|---|---|---|---|
| 5L | S65SC C500 | 2 | 160 | 5037832344243 |
DILUTION:
Dilute 100 ml of cleaner per 1L of water for general cleaning, then spray evenly over the surface. For stubborn stains: apply undiluted directly to the spot.
APPLICATION:
Apply the cleaner evenly over the surface. Let it work: Allow up to 15 minutes contact time, then scrub with a stiff brush to lift grime.
CLEAN UP:
Rinse thoroughly: Rinse the area well with clean water (or pressure wash) and do not let the product dry on the surface.
SCRUBB Porcelain Paving Cleaner is designed specifically for exterior porcelain tiles and paving slabs. It helps clean and maintain porcelain patios, pathways and outdoor tiled areas while preserving the surface finish.
The cleaner is formulated to lift grime, ingrained soil, grease, bird droppings and leaf stains commonly found on outdoor porcelain paving. It helps restore the appearance of the surface while maintaining it in good condition.
No. The formulation contains no bleach or acids, which can damage paving over time. It is designed to clean porcelain surfaces while maintaining their original slip-resistant properties.
No. This product is intended for general cleaning and maintenance of porcelain paving. Stains caused by algae or mould require a dedicated treatment designed specifically for biological growth.
For general cleaning, dilute 100 ml of cleaner per litre of water and apply evenly using a sprayer. Allow up to 15 minutes contact time, then agitate with a stiff brush and rinse thoroughly.
Yes. For tougher stains or heavily soiled areas, the product can be used undiluted as a spot treatment. Apply directly to the stain, work it in with a stiff brush, allow up to 15 minutes contact time, and then rinse thoroughly.
Yes. The cleaner can be applied using a hand sprayer or through a pressure washer, depending on the cleaning method preferred.
Yes. As paving materials and jointing compounds can vary, it is recommended to test the cleaner on a small, inconspicuous area first, especially where surfaces are jointed with resin-based or rapid-setting grouts.
No. The cleaner should not be allowed to dry on the surface. After the recommended contact time and agitation, rinse the area thoroughly with water.
Got a question that’s not answered here? No problem, get in touch for expert help and advice.
