SCRUBB Sandstone Paving Cleaner will lift even deeply ingrained grime, black spots and stains to deeply clean and restore the surface to its original appearance. Developed for the renovation of natural sandstone paving without eroding or etching the surface.

| Size | Product Code | Case Qty | Pallet Qty | Barcode |
|---|---|---|---|---|
| 5L | S52SC C500 | 2 | 160 | 5037832344250 |

APPLICATION:
Apply to clean surface: Clear away loose dirt and debris, then apply the product neat (undiluted) using a sprayer or watering can until the sandstone is fully saturated.
METHOD:
Leave to work: Allow at least 12 hours of contact time (longer for heavy staining). Keep pets and children away during this period and avoid rain, sunlight, or hot weather.
CLEAN OFF:
Rinse off: After the dwell time, rinse the surface thoroughly. For best results, especially on deep staining, use a pressure washer.
SCRUBB Sandstone Paving Cleaner & Renovator is designed specifically for natural sandstone paving surfaces. It helps restore patios, paths and other sandstone areas by removing deeply ingrained grime and staining.
The formulation is designed to lift deeply ingrained grime, black spots and general staining that can build up on sandstone paving over time, helping restore the natural appearance of the surface.
No. The product has been developed to deep clean natural sandstone without eroding or etching the surface when used as directed. However, surfaces can vary so testing first is always recommended.
Remove loose debris from the surface and apply the cleaner neat using a sprayer or watering can. Saturate the paving and allow the product to work before rinsing thoroughly with water or pressure washing if required.
Allow the cleaner to work for at least 12 hours before rinsing. For heavily contaminated surfaces, longer contact times may be beneficial and the cleaner can be left to continue working for several days before rinsing.
For stubborn staining or heavy contamination, working the product into the surface with a stiff-bristled brush can help improve results before leaving it to work.
A 5-litre container provides coverage of up to approximately 30 m², depending on the condition of the paving and the level of contamination.
The cleaner is not suitable for use on coloured grouts or certain specialist jointing compounds. Care should also be taken to avoid overspray onto plants, fabrics, or delicate surfaces.
Avoid applying the cleaner during strong sunlight, hot weather, or when rain is expected within 12 hours, as this can affect performance.
Store the product upright in its original container, away from direct sunlight and extreme temperatures. Always keep the cleaner out of reach of children and pets.
Got a question that’s not answered here? No problem, get in touch for expert help and advice.

Need help? Our team is just a message away