S48 Grout & Cement Film Remover

Removes excess grout, tile adhesive residues & cement films

Concentrated deep cleaner
Use on newly installed tiles
Strengthens grout lines

SCRUBB Grout & Cement Film Remover dissolves hard-to-shift grout films left behind after installing tiles. Suitable for use on porcelain, quarry, ceramic, granite and slate tiles. Cuts down cleaning time and helps strengthen the grout lines.

IDEAL USE CASES:

Post-tiling cleanup: Perfect for cleaning grout haze after tile installation. The leftover film is notoriously difficult to remove with regular detergents, often requiring weeks of repeated cleaning.
Stubborn stains: Removes stains from tiles where grout has seeped into the pores, something normal cleaning cannot address.

Best Practice

Limestone or lime-based surfaces: Do not use on limestone, travertine, marble, or other lime-containing surfaces, as this product may damage them.
Use with extreme care on limestone, travertine, marble or other soft natural stones, as this product may damage them. Always test in a small, inconspicuous area first.
Avoid over-scrubbing: Prevent damaging tiles or grout lines by working gently with a brush or scouring pad.

Buy now at Screwfix Buy now at CPC

Size	Product Code	Case Qty	Pallet Qty	Barcode
1L	S48SC C100	6	600	5037832332936

S48 GROUT & CEMENT FILM REMOVER 1L FRONT

Having tried lots of products, this one really worked on very stubborn grouting.

Brilliant. Never encountered Grout Haze before and the tiles I chose were not flat, so loads of nooks and crannies! This stuff has made them sparking clean.

Purchased this item last week to remove grout haze from a newly tiled porcelain floor. The tiles had a rough non slip finish & I found it difficult to remove the grout residue completely by rinsing with water. I mixed a small amount of the cleaner at 4:1 as recommended & applied it with a sponge wrapped in a micro fiber cloth. PPE was worn as recommended. After around 10 minutes the residue was washed off with clean water & when the tiles had lost the haze & were in perfect condition with the grout lines accentuated. The result was better than I expected.

The tiles we bought had a rough surface, vitreous colourful tiles, after grouting and cleaning down it looked like a haze of grout was left all over. Used the cleaner neat after a little fizz where it got to work.....it did the job.

101 How-To Series Videos
Instructions
Downloads
FAQs

101 How-To Series Videos

SCRUBB 101 How-To Series: S48 Grout & Cement Film Remover

Instructions

PRE-APPLICATION:
Always test on an inconspicuous area before use. Ensure the grout has been fully cured.
Dilute appropriately: Mix 1 part cleaner to 4 parts warm water. If grout film is particularly tough, the product may be used undiluted.

APPLICATION:
Spread the solution over the area to be cleaned and let it sit for about 15 minutes. Use a scouring pad or brush to work the solution into areas with heavy grout residue or tile adhesive.

CLEAN OFF:
Rinse 3-4 times with fresh water to ensure all solution is removed.

Downloads

Product Specification  Safety Data

FAQs

How do I use this SCRUBB Grout & Cement Film Remover?
For grout films after tiling, dilute 1 part remover to 4 parts warm water. Apply to the area and allow ~15 minutes contact. Use a scouring pad or brush for heavy deposits. Rinse 3–4 times with clean water. For heavily soiled areas, it can be used undiluted—always test in an inconspicuous spot first. Coverage: up to 50 m².

Will SCRUBB Grout & Cement Film Remover remove dried sand, cement, or grout haze?
Yes, it removes grout haze and dried sand/cement deposits. Always test a small area first and rinse thoroughly to avoid white marks.

Can SCRUBB Grout & Cement Film Remover be used on porcelain tiles or high gloss tiles?
Yes, safe for porcelain and high gloss tiles. For large mortar deposits, SCRUBB EradiCRETE may be more effective. Can be diluted for light cleaning or used neat for heavy deposits.

Can SCRUBB Grout & Cement Film Remover be used on vinyl tiles?
Yes, it removes cementitious dust from vinyl tiles without damage. Test a small area first.

Will SCRUBB Grout & Cement Film Remover affect existing grout or wood surfaces?
When used as directed, it will not weaken existing grout. Avoid leaving undiluted product in contact with grout lines for long periods. Prolonged contact may alter wood colour, depending on type and finish; brief contact with diluted solution is usually safe.

Is SCRUBB Grout & Cement Film Remover safe for marble?
Use with caution. Marble is soft and can be affected by strong cleaners. Test a small, hidden area first.

Got a question that’s not answered here? No problem, get in touch for expert help and advice.