Ideal workshop solvent degreaser, quickly dissolves grease, grime, oily residues, excess sealants and adhesives. Suitable for use on metals, plastics, sealed/painted concrete, vehicle surfaces and glass.
| Size | Product Code | Case Qty | Pallet Qty | Barcode |
|---|---|---|---|---|
| 500ml | G51SC R50 | 6 | 600 | 5037832343451 |
DIRECTIONS FOR USE:
Always test on an inconspicuous area before use. Apply the product to the surface to be cleaned. Allow 5-10 minutes contact time. Wipe up with a clean dry cloth. If necessary, rinse surface with soapy water. Avoid use on rubber or polyurethane surfaces.
DANGER:
Contains: Hydrocarbons, C11-C14, n-alkanes, isoalkanes, cyclics, <2% aromatics. Extremely flammable aerosol. Pressurised container: May burst if heated. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Protect from sunlight. Do not expose to temperature exceeding 50°C/122°F
Yes, it can soften some adhesives if it stays in contact for a couple of hours. Vertical surfaces may limit effectiveness due to the solvent’s thin consistency.
Contractors Solvent may soften some paints and varnishes, but effectiveness depends on the type and age of the coating. Test a small area first.
Generally, yes, it is safe on tiles, metal, and glass, but prolonged contact may affect some finishes. Always test a small inconspicuous area first.
Apply with a cloth, brush, or sponge. Allow sufficient contact time for the solvent to work, then scrape or wipe away softened material. Repeat if necessary.
Contact time varies with the material being removed. For sealants and adhesives, 2–4 hours may be needed. Always monitor to avoid damaging the surface.
Got a question that’s not answered here? No problem, get in touch for expert help and advice.
