SCRUBB Hardwood & Laminate Floor Refinisher is an easy-to-use coating which restores the original shine to the surface of laminate and finished hardwood flooring. Suitable for use on all laminate floors and surfaces, and on hardwood and engineered-hardwood floors with a varnish, acrylic or polyurethane finish. Do not use on wax or oil finished wood surfaces.
| Size | Product Code | Case Qty | Pallet Qty | Barcode |
|---|---|---|---|---|
| 1L | C16SC C100 | 6 | 600 | 5037832335470 |
Use only on fully clean, dry surfaces. For best results, clean the area to be treated with SCRUBB Hardwood & Laminate Floor Cleaner and allow to dry before applying the coating. Test on a small inconspicuous area before use. Spread SCRUBB Hardwood & Laminate Floor Refinisher evenly over the surface using a clean dry cloth or mop. Allow 30 minutes for the coating to cure. If desired, up to 3 coats may be applied, leaving 30 minutes between coats. Following the final coat, allow at least 5 hours for the surface to fully cure before moving furniture back into the area.
Will SCRUBB Hardwood & Laminate Floor Refinisher remove stains on wood floors?
No, this product is a sealant/coating and will not remove existing stains or coatings.
How is this SCRUBB Hardwood & Laminate Floor Refinisher product applied?
It can be applied with a brush, cloth, or mop. It is a coating, not a cleaner.
How do you apply SCRUBB Hardwood & Laminate Floor Refinisher step by step?
Ensure the surface is clean and dry. Test on a small area first. Spread evenly with a clean dry cloth or mop. Allow 30 minutes for curing. Up to three coats can be applied, leaving 30 minutes between coats. After the final coat, allow at least five hours before moving furniture back.
What is the coverage per litre of SCRUBB Hardwood & Laminate Floor Refinisher?
1 litre covers approximately 10 square metres.
Got a question that’s not answered here? No problem, get in touch for expert help and advice.
