Video transcript
SCRUBB Water Seal is a protectant for exterior porous surfaces like brick work, concrete blocks, pebble dash, natural stone and rendering. It penetrates into the surface and forms a invisible breathable barrier against rain and moisture. It can prolong the life of exterior surfaces by protecting against freeze thaw damage and against efflorescence and white marks.
SCRUBB Water Seal can be applied to dry or damp surfaces but don’t apply when the surface is wet or when rain is forecast within 12 hours. It’s best to use a pressure sprayer or roller to apply and the important thing is to make sure the surface is are fully saturated if using a pressure sprayer. A roller is always recommended to use as well to make sure there’s no patches that have been left untreated.
So this is obviously a paving block but we’re going to use this to represent a house brick and we’re going to apply this to this surface just making sure it’s fully saturated. It can be applied with a pressure sprayer brush or roller. If using a pressure sprayer it’s also advisable to follow up with a roller to make sure the treatment is spread all over the surface evenly and you haven’t got bare patches. Apply a second coat within an hour before the first coat is fully dried. If needed a third coat can be applied an hour after the second coat.
SCRUBB Water Seal: Ultimate protection for exterior surfaces!
Shield your exterior surfaces from rain, moisture, and freeze-thaw damage with SCRUBB Water Seal. This advanced protectant penetrates deep into porous materials like brickwork, concrete, rendering, pebbledash, and natural stone, forming an invisible, breathable barrier that prolongs the life of your surfaces. It also helps prevent unsightly efflorescence, keeping your exterior looking clean and well-maintained.
Key Features:
- Forms an invisible, breathable barrier against moisture.
- Reduces freeze-thaw damage and prevents efflorescence.
- Ideal for porous surfaces like brick, stone, concrete, and more.
How to Use:
- Ensure surfaces are thoroughly cleaned and free from debris, moss, and any necessary repairs are complete.
- Apply to dry or damp surfaces (not wet), avoiding application during rain or if rain is forecast within 12 hours.
- Use a pressure sprayer, brush, or roller to saturate the surface, working from the bottom up on vertical areas. Ensure even coverage with a roller or brush.
- Apply a second coat within 1 hour, once the first coat has absorbed but before it cures.
- Clean tools immediately with warm water.
Important:
- Do not apply below 10°C or on surfaces with rising damp.
- Test on a small area first, as some substrates may darken.
- Avoid use on retaining walls or surfaces previously treated with other coatings.
Protect your surfaces with SCRUBB Water Seal—the durable and breathable solution for long-lasting defense against the elements.
