Video transcript
Scrubb Adhesive Remover quickly dissolves and removes excess glue, sticky residue, tar spots and marker pen off almost any surface, including metals, finish woods and plastics. However, we recommend you avoid using this on delicate fabric, such as silks and leather.
On this board we’ve got some paper labels, a plastic label and a patch of contact adhesive and we’ll show you what the Scrubb Adhesive Remover can do. You can apply this either with a cloth or directly from the bottle. On the contact adhesive we’ll just pour a thin layer over; on the paper labels we’ll also just cover the surface and it will soak through the paper. With the plastic labels we’ll peel back a corner first and then apply the adhesive remover along the peeled edge, this will allow the adhesive remover to soak in underneath the plastic label. The recommended dwell time is 5 to 10 minutes.
We’ve let this sit for about 7 minutes and you can see the contact adhesive have completely dissolved. We’re now able just to wipe it off. We could also use a plastic scraper at this point. The plastic label—the adhesive remover has completely soaked in underneath the label and the label can be easily peeled back and the paper label—the adhesive remover has soaked through the paper softening up the adhesive underneath and allowing the label just to be peeled up very easily.
For more Scrubb advice check out our other videos.
SCRUBB G44 ADHESIVE REMOVER: Effortlessly Dissolve Sticky Residues and Stubborn Grime!
Easily remove sticky residues, labels, glue, chewing gum, tar spots, and more with the SCRUBB G44 Adhesive Remover. This powerful formula tackles tough adhesives like glue, tape residues, ink stains, and even marker pen graffiti. It’s ideal for use on a variety of surfaces, making it a must-have for any cleaning toolkit.
Key Features:
- Dissolves sticky residues, removes labels, and shifts grime.
- Tackles glue, tape residues, chewing gum, tar spots, ink stains, and marker pen graffiti.
- Suitable for use on most surfaces, including metal, finished woods, laminate, plastics, glass, and tiles.
- Not recommended for delicate fabrics, silk, leather, suede, rubber, or polyurethane foam surfaces.
- Always test on an inconspicuous area first before full use.
How to Use:
- For Label, Sticker & Tape Removal:
- Manually remove as much of the label or tape as possible to expose the adhesive residues.
- Liberally apply SCRUBB Adhesive Remover to a clean, dry cloth and work into the residue.
- Leave for 5-10 minutes for best results, then wipe up or remove residue using a non-scratch scraping tool.
- If necessary, rinse the surface with warm soapy water.
For Tar Spots, Rubber Scuff Marks, Marker Pen Graffiti, etc.:
- Apply SCRUBB Adhesive Remover directly to the surface, or use a clean dry cloth to apply.
- Allow 5-10 minutes of contact time, then wipe up with a clean, dry cloth.
- Rinse the surface if necessary with warm soapy water.
Important:
- Not suitable for use on rubber or PU foam-backed carpets.
- Always test on a small, inconspicuous area to ensure compatibility.
- Quickly and effectively remove tough residues and stains with SCRUBB G44 Adhesive Remover—the ultimate solution for sticky messes.
